Wednesday, November 20, 2019

14. Using the KAATSU Cycle 2.0 - KAATSU Training Mode



While the KAATSU Cycle modality is the primary feature of the KAATSU Cycle 2.0, the device is also versatile and can also be used for KAATSU Training.

In order to change from KAATSU Cycle to the KAATSU Training mode, place the device in its "neutral position". That is, press the middle ON/OFF button so only the Red Light is on. The G and P lights should be off. CYCLE appears on the LED screen.

Press the LOW (L) button with a Long Hold for 3 seconds. TRAINING will automatically appear on the LED screen.

Press PRO (P) on a Short Hold for 1 second. T 15-200 appears with the number 200 flashing. T indicates the Training mode. 10 indicates a maximum of 10 minutes to use. 200 indicates the default SKU level in the KAATSU Training mode.

Press the ON/OFF button to start KAATSU Training at the default level of 200 SKU for 10 minutes. To stop KAATSU Training, press the ON/OFF button.

In order to increase the pressure level from the default 200 SKU in the KAATSU Training mode, press the PRO (P) button to increase the SKU level by 10 SKU. Repeatedly press PRO (P) button to increase the SKU levels by more than 10 SKU. Each press will increase the SKU by 10.

In order to decrease the pressure level from the default 200 SKU in the KAATSU Training mode, press the GROUP (G) button to decrease the SKU level by 10 SKU. Repeatedly press GROUP (G) to decrease the SKU levels by more than 10 SKU. Each press will decrease the SKU by 10.

To set a new SKU level, press the ON/OFF button and the device will automatically inflate to your new desired KAATSU Training SKU level.

Copyright © 2014-2019 by KAATSU Global

No comments:

Post a Comment